Boss Audio Systems RIP-496 Owner's Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 356
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
Flash-to-Pass
With the lever in the low beam position, pull the lever
toward you to momentarily switch to high beams (to
signal that you
are
going to pass). If you have the
headlamps on, when you release the lever they will
return to low beams.
Windshield Wiper/Washer Lever
The lever on the right side
of the steering column
controls the windshield
wipers and washer.
Move the lever to the position you want:
OFF:
The wipers are
off.
INT
Intermittent wiper operation (if your Prizm has
this).
In
light rain or snow, you might want
to
use this
position rather than continuous wiping.
You
can change
the time between wipes by turning the INT TIME band.
Turn the band toward
S
for a longer delay
or
toward
F
for a shorter delay.
LO:
The wipers will
run
continuously at low speed.
HI:
The wipers will run continuously at high speed.
MIST
(If
you
have mist-type wipers, the lever doesn’t
have an INT position.) For a single wiping cycle, push
the lever to MIST. Hold it there for a second, then let go.
The wipers will stop after one cycle.
If
you want more
cycles, hold the lever at MIST longer.
Be sure to clear ice and snow from the wiper blades
before using them.
If
they’re frozen to the windshield,
carefully loosen or thaw them. If your blades do become
damaged, get
new
blades
or
blade inserts.
Heavy snow or ice can overload your wipers.
A
circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.
2-27
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 355 356

Comments to this Manuals

No comments