Boss Audio Systems RIP-496 Owner's Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 356
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
Starting
Your
Engine
Automatic Transaxle
Move your shift lever to PARK
(P)
or NEUTRAL (N).
Your engine won’t start in any other position
--
that’s a
safety feature.
To
restart when you’re already moving,
use NEUTRAL
(N)
only.
NOTICE:
Don’t try to shift to PARK
(P)
if your Geo is
moving.
If
you do, you could damage the
transaxle. Shift to PARK
(P)
only when your
Starting Your
L4
Engine
1.
Without pushing the accelerator pedal, turn
your
ignition key to START. When the engine starts, let
go
of
the key. The idle speed will go down as your
engine gets warm.
NOTICE:
Holding your key in START for longer than
15
seconds at a time will cause your battery to be
drained much sooner. And the excessive heat can
damage your starter motor.
vehicle is stopped.
2.
If it doesn’t start in
three
seconds, wait about
15
seconds and
try
again to start the engine by
Manual Transaxle
The gear selector should be
in
NEUTRAL
(N).
Hold
the clutch pedal to the floor and start the engine. Your
vehicle won’t start
if
the clutch pedal is not all the way
down
--
that’s a safety feature.
turning the ignition key to STmT. Wait about
15
seconds between each try to help avoid draining
your
battery.
When your engine has run about
10
seconds
to
warm
up, your vehicle is ready to be driven. Don’t “race”
your engine when it’s cold.
If
the weather is below freezing
(32°F
or
0°C)’
let
the engine run for a few minutes to warm up.
2-10
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 355 356

Comments to this Manuals

No comments