13
OPERATION
Pressing MUT button on the front
panel or MUTE button on the remote
control will mute the sound. Press it
again will resume the sound.
◆ Mode selection
Press MODE button on the front panel or
MODE on the remote control to
select the desired mode to enjoy. Such
as Radio, USB, SD, AV IN mode.
◆ Equalization
In radio mode, press AUDIO button on
the remote control or shortl y press
EQ/TA button on the front p anel to turn
on equalization function and to select
desired audio mode, such as POP, CLAS,
ROCK, JAZZ and OFF.
In media play mode, press and hold the
button is EQ function.
◆ Clock display
Repeatedly press CLOCK button on the
front panel to let the clock appear on the
screen or not.
◆ Brake function
If the brake wire (pink wire) isn’t
connected to the ground (when driving),
the picture will not be shown on the
screen in video play mode for safety
purpose. Only the audio will be heard.
Note: Only when p arking, the video
picture can be seen on the screen. When
driving, the warning information will b e
displayed.
◆ Rearview function
On the back of the unit, there is a yellow
jack for rearview video in. When backing
a car, the picture of the screen will switch
to rearview picture automatically and the
unit will play the video information that
inputted from the yellow rearview video in
jack.
◆ Power-down memory function
The unit has the power-down memory
function and some dat a will n ever lose
even when power's off. You can press the
numerical button 1, 3, 6 on the front panel
of the unit in succession then hold press
4 button to clear the power-down memory
function and “EEP INNT” will appear.
USB PLAY OPERATION
On the front of the unit, when you open the
USB cover, you will see an USB interface.
An USB device can be connected through
this interface.
When you connect an USB device through
the interface, the unit will search the
audio/video/photo files in the USB driver
and start to play automatically.
If in other mode, you can also press MODE
button to select USB mode.
NOTE:
- When in USB play mode, be sure not to
remove the USB driver from the USB
interface.
When stop USB play , you can remove
the USB drive, af ter remove USB driver
from the unit.
- When connecting an MP3 player and
there has normal battery in the player
(non rechargeable ba ttery), you should
remove the battery from the MP3 player
then connect it to the USB interface.
Otherwise, it may cause battery burst.
◆ Stopping playback
Press button on the front p anel or
on the remote control for one time to
pre-stop the playback. When
button on the front panel or on
the remote control is pressed, normal
playback will continue.
Press or button twice to stop
the playback completely.
◆ Pausing play
Shortly press on the front panel or
on the remote control during
playback to stop playback temporarily.
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals