Boss Audio Systems BV7280 Owner's Manual

8OPERATION LOCATION OF KEYS 1. (Release button) 2. Volume knob (when r

9 LOCATIONS AND FUNCTION OF THE REMOTE CONTROL

10 1. Press it to turn on the unit. When the unit is on, press it to turn the unit off. 2. MODE When the unit is on, press it to select the di

11 21. ZOOM Press to allow the picture to be increased in size. 22. SELECT Press to enter into the system setup menu. 23. SEEK- / SEEK+ Pre

12OPERATION BASIC OPERATION ◆ Turn the unit on/off When all the connection is finished, press MUT button on the front panel or on the remote cont

13OPERATION Pressing MUT button on the front panel or MUTE button on the remote control will mute the sound. Press it again will resume the sound.

14OPERATION Shortly press again will return to the normal playback. ◆ Rapid forward / rapid reverse Hold press / on the front panel or hold

15OPERATION b) Press / , / cursor buttons on the remote control to select the items you want to program. The items you selected will bec ome

16OPERATION 3) AUDIO SETUP When you open the AUDIO menu, you will see the following picture: *AUDIO OUT: Change among SPDIF/OFF, SPDI

17OPERATION the audio/video/photo files in the card and start to play automatically. The operation is the same with the USB operation described ab

To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.WARNING

18OPERATION ◆ Local/Distant Press LOC button on the remote control to select between local and distant stations. Local setting for reception of stro

19TROUBLE SHOOTING If it appears that your unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under n

20SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Maximum Output Power : 4x80 watts Current Drain

1BV7280 OWNER’S MANUAL Mobile Audio/Video System y PLL Synthesizer Stereo Radio y Automatic Memory Storing y RBDS

2 CONTENTS INSTALLATION... 3 USING THE DETACHABLE FRONT PANEL ...

3INSTALLATION Notes: y Choose the mounting location where the unit will not interfere with the normal driving function of the driver. y Before fina

4INSTALLATION (1) Dashboard (2) Tabs 7. Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables. 8. Sli

5INSTALLATION To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw holes on

6 To Detach the Front panel 1. Press the release button on the left-top of the panel and pull off the control panel. 2. Keep the control pa

7WIRING CONNECTION Connector A 1. N.C. 2. BRAKE (PINK) 3. REAR VI